CB+114M Pump With Explosion-Proof Motor

The CB+114 Explosion Proof Centrifugal Pump

The CB+114 Pump with Explosion-Proof Motor is a sanitary centrifugal pump designed for small to medium-sized applications, including the transfer of flammable liquids. The CB+114 is a redesigned C-Series pump that maintains the reliability and durability of the C-Series while adding an internal mechanical seal. The internal seal allows the product to fully lubricate the seal during use and allows the Clean-in-Place (CIP) process to completely sanitize it. The CB+114 also features a drive collar that clamps evenly on all sides of the shaft and a threaded impeller nut that fully secures the impeller. Fitted with an explosion-proof motor and sanitary Tri-Clamp connections, the CB+114 is suited to CIP and product transfer applications involving flammable liquids.

The pump is paired with a cast iron, NEMA C-Face Premium Efficiency explosion-proof motor, UL/CSA approved for Class I, Groups C and D, and Class II, Groups E, F, and G (T3B). It is supplied as a pump and motor only, without a switch or cart. For a mobile, ready-to-move setup with a Killark explosion-proof motor starter, see the CB+114M Explosion-Proof Portable Pump Assembly.

Key Features:

The CB+114M Pump with Explosion-Proof Motor combines the CB+114 pump head, a C-Series design with an internal cartridge seal, with an explosion-proof motor, allowing you to:

• Safely transfer high-proof alcohol, ethanol, and other flammable liquids with a UL/CSA approved explosion-proof motor.
• Keep the seal fully lubricated by the product during use.
• Completely sanitize the seal during CIP, with no pooling on the seal.
• Achieve greater seal pressure with less leaking.
• Rely on an encased cartridge seal that is more sanitary and less prone to breakage.
• Prevent shaft wobble with a drive collar that clamps evenly on all sides of the shaft.
• Secure the impeller with a threaded impeller nut.
• Clean behind the impeller during CIP, using two specialized gaskets that seal the shaft.
• Connect with standard 1.5" x 1.5" Tri-Clamp fittings.

Voltage Options:

The explosion-proof CB+114 is available in three-phase power and is compatible with 230V, 460V, and 575V. Single-phase motors are available as a special order for 1.5 HP motors only. Contact us for a quote.

• 115 volt single phase (special order only)
• 230 volt single phase (special order only)
• 230 volt three phase
• 460 volt three phase
• 575 volt three phase

Seal Materials:

The CB+114 uses an internal mechanical cartridge seal, available in the following materials:

• Elastomers
• • Standard: EPDM
  • Special Order: Viton
• Rotary Seal: 
  • Standard: Carbon 
  • Special Order: Silicon Carbide
• Stationary Seal:
  • Standard: Silicon Carbide

Horsepower Options:

Available from 1.5 HP to 3 HP, this pump can be matched to a range of transfer applications.