How To Replace a G2 Turbine Flow Meter Rotor
In this video, we will show you how to disassemble the G2 Turbine Flow Meter Assembly to replace the rotor.
-
Centrifugal pump maintenance
Centrifugal pumps are built to last. However, the better you care for them, the longer they will last.
-
Flexible Impeller Pumps: Wineries, Distilleries, and Breweries
The flexible impeller pump (FIP) is popular for its affordability, its ability to pump solids, and its easiness to repair. These qualities make them popular in breweries, distilleries, and wineries....
-
Air Operated Diaphragm Pumps - the how, what, and why
The Air Operated Diaphragm (AOD) Pump is a positive displacement pump powered by compressed air. AOD pumps offer a sanitary, energy-efficient way to transfer product. They are ideal for viscous...
-
Picking Your Mechanical Seal
Seals are vital to the functionality of any pump - but how do you pick a seal? Seals are vital to the functionality of any pump - but how do...
-
Troubleshooting a Plate Heat Exchanger
You don't have to be an experienced mechanic to troubleshoot your plate heat exchanger (PHE). PHE’s are quite durable, however, they can face performance issues on occasion. The three main issues...
-
What is Cavitation?
The strange relationship between pressure and state You probably already know that the boiling point of water is 100°C (212°F) but what you might not know is that that only...
-
We've just launched our Specific Gravity and Viscosity Table!
Today we've released our viscosity and specific gravity table online. If you've read any of the C-series manuals we put out, you're probably familiar with this table, as it lists each for...
-
How does a counterflow wort chiller work?
While brewers have traditionally used air circulation to chill their wort the modern brewery now just uses heat exchangers...
-
Parallel vs. Counterflow Heat Exchangers for non-Engineers
You’ve had it happen, right? You hooked up your plate heat exchanger, it didn’t cool your wort nearly as much as you would have liked, and you thought it was...
-
Three tips for hooking up your heat exchanger right
Hooking up your heat exchanger/wort chiller is not a difficult task, but like anything in a brewery, it needs some planning.
-
Why a 1800RPM instead of a 3600RPM motor?
We get a lot of questions about why we use a 1800 RPM motor instead of a 3600 RPM motor on our variable speed pumps. The quick answer is that...
-
What NOT to do to your Digital Pump Controller!!
Stop! Please don’t do this to your new Digital Pump Controller. When we build your portable pump, we test it on our hydraulic test bench before shipping it to you....
-
How to set the seal drive collar on a C114 series pump
Topline has published a YouTube video on how to set the drive collar on a C-series centrifugal pump. This applies to the Topline pump, of course, but also to other...
